Expert Answers about Monaco Dynasty Motorhome

• Tips for Getting Prodigy RF Brake Controller to Pair
• There are a few things you can try to get the unit to pair. First, If you do not see displayed what the instructions say just keep going through the steps. Sometimes, it will not display what it is supposed to but it will still work if you go through the steps to completion. If that does not work then you can try taping off the pin in the 5 oclock position at the back of the RF (where the trailer plugs into) using electrical tape. Then go through the installation process. If that doesn't...
  view full answer...


• Replacement Lippert Kwikee 30 Series Step Gear and Linkage
• For your Lippert/Coach Kwikee 30 Series step the best solution we have is a new step gear/linkage kit part # LC379160 which will fix your steps that don't want to come in and out.
  view full answer...


• Replacement Fan and Motor Assembly Recommendation for Fantastic Roof Vent in Monaco Dynasty
• Yes, based on the picture you submitted the Replacement Fan Motor Assembly Kit # FVK8017-00 that you referenced will be the correct replacement fan and motor setup.
  view full answer...


• Comparing Lippert 35 Series Electric RV Step Units
• The four Lippert 35 Series RV electric step items are essentially the same product but they differ in some of the included components. In certain cases the original electronic control unit on the RV unit may still be functional and only the step and motor are needed. Part # LC3691462 includes the step, motor and switch kit. Part # LC369146 includes the step, motor and control unit. Part # LC3756271 includes the step, motor and switch kit. Part # LC3691461 includes the step, motor, control...
  view full answer...


• Replacement Gear Pack for Slide-Out on 2002 Monaco Dynasty Trailer
• We do have a nice selection of replacement slide-out gear packs available from Lippert. I wasn't able to verify the type of slide-out you have on your 2002 Monaco Dynasty Trailer, so you will want to try and verify that it is in fact manufacturered by Lippert and then simply match up the gear pack to the tubing size the room slides on. For 2 x 2 inch tubing you will use # LC281331 for a replacement gear pack. There is also a 2-1/2 x 2-1/2 inch tubing option # LC123356 for the heavy duty...
  view full answer...


• Is The Valterra Shower Drain Compatible With PVC Threads?
• The threads themselves on the Valterra Shower Drain # A01-2012VP are not made from PVC however this drain is compatible with ABS plastic and PVC. This drain has a 2-1/2" stainless steel flange, and will fit into a 1-3/4" drain hole and 1-1/2" P-traps.
  view full answer...


• Wiring Diagram for Advent Air Conditioner ACM135
• Advent Air Conditioners like part # ACM135 come with a connector that pairs up directly with the standard 6-wire connector. If you have a 9-wire connector then you need the kit # ACRG15 as well. For wiring I'm attaching some photos of diagrams for you to reference. We typically recommend having a professional do the installation so if this is something you've never done before I recommend at least having someone who has done this type of installation before come out and walk you through...
  view full answer...